Slab Leak Repair
What Are Your Slab Leak Repair Options?
There is no one-size-fits-all way to repair slab leaks. That’s why it is so
important to have a professional plumbing service go to the site and perform a water
leak inspection. A skilled expert will provide sound advice that allows homeowners
to make the best choice when determining how to fix slab leaks on their property.
There are three ways to correct this problem.
Repair Slab Leaks with a Layer of Epoxy
Fixing slab leaks with epoxy is the least disruptive approach to correcting the
issue. Rather than completely rebuilding or removing all or part of the line, this
method uses durable epoxy to coat the opening. A plumber will clean the inside of
the pipe then apply the epoxy. This substance will seal the opening.
When going this route, the epoxy is applied to the interior of the entire pipe rather
than just a small portion. That means any unnoticed holes under the slab will also
be sealed during the epoxy process. If the leaking water pipe is very old, homeowners
may consider the next option instead.
Repiping Your Water System Above the Slab
Rather than contend with tearing up heavy concrete flooring, some homeowners opt
for the repiping approach to slab leak repair. This method requires building a whole
new plumbing system that bypasses the lines originally installed within or under
the slab foundation. Lines can be run up walls and along ceilings so they remain
out of the way.
Repiping to fix a slab leak works well, but it can be an intimidating endeavor for
any frugal homeowner. Our expert plumbers can assist California residents with their
decision to ensure that it is the best option for their home. Aged plumbing that
has been subjected to high water pressure, soft water or electrolysis may be significantly
weakened. This could warrant repiping to prevent slab leaks and line breaks from
appearing later.
Slab Leak Repair with a Jackhammer
We urge homeowners to talk to a professional plumber before trying to use a jackhammer
on any slab leak. This is a third option, but it can also be one of the most risky
if attempted by the inexperienced. This method starts with a hole being made in
the floor to locate the damaged water pipe. Once found, the slab leak can be removed
and a new length of pipe soldered in its place.
The jackhammer approach is the most commonly used slab leak repair method, but it
is also the most invasive. A crew is needed to remove pieces of concrete. Whoever
works on the slab leak should also be well-versed in handling heavy equipment like
a jackhammer and be capable of welding.
Understand Your Slab Leak Repair Options
Inland Empire Plumbing is available to explain your slab leak repair options and
provide expert advice so you make a sound decision. Leaking water is a problem we
take very seriously. Contact us today so we can answer your slab leak repair questions
and help you fix the plumbing problem as quickly as possible.